Stamping

From quick change dies, multiple process stampings, and progressive dies our presses are equipped to handle both low and high volume work. We have material feeders on both our 200ton and 110ton press to accomodate high volume progressive dies.

Press w/ Technical Specifications
Komatsu OSB200 with ORII Straightener/Feeder LCC 04KR3

Press capacity: 200 ton
Stroke length: 200 mm
Stroke per minute: 25-50 S.P.M
Slide area: 850x650 mm
Bolster area: 1250x850 mm
Slide adjustment: 120 mm
Die height: 480 mm
Frame type: C

Feeder: 
Stock Width  50-400mm 1.96"-15.7"
Stock Thickness 0.3-3.2mm 0.011"-.0.125"
Coil Weight Max. 2500KG 5511 lbs
Coil O.D. Max.  1200mm 47.2”
Coil I.D.  508mm 20.0”
Feed Length Max.* ~400mm 15.7”
Line Speed Max 16m/m in 52Ft/min
 Komatsu OBS110 with Nishida straightener/Feeder L3230B

Press capacity: 121 ton
Stroke length: 150mm 5.9”
Stroke per minute: 25-50 S.P.M
Slide area:  600x450 mm   23.6” x 17.7”
Bolster area: 1100x700 mm   43.3” x 27.5”
Slide adjustment: 100 mm   3.9”
Die height:  380mm   15”
Frame type: C

Feeder: 
Stock Width  50-300mm 1.96"-11.8"
Stock Thickness 0.8-3.2mm 0.031"-.0.125"
Coil Weight Max. 2000KG 4409 lbs.
Coil O.D. Max.  1000mm 39.37”
Coil I.D.  450mm 17.7”
Feed Length Max.* ~400MM 15.7”
Line Speed Max 16m/m in 52Ft/min

 Aida NC1-80 

Press capacity: 88 ton
Stroke length: 100 mm 3.94”
Stroke per minute: 55-110 S.P.M
Slide area: 540 x 460 mm 21.3’ x 18.1”
Bolster area: 950mm x 460mm 37.4” x 18.1”
Slide adjustment: 80mm 3.15”
Die height: 300mm 11.81”
Frame type: C
See our press in action!